HWASHI High Speed Wire Straightening and Cutting Machine 5mm-7mm Wire
Detailed Description Of High Speed Wire Straightening and Cutting Machine:
1. HWASHI high speed wire straightening and cutting machine (5mm-7mm Wire) is suitable for wire, stainless steel wire, galvanized wire, aluminum, water (powder) draw lines and other metal wire straightening and cutting, and then butt welding, automatic unloading.
2. Sending wire wheel, such as the use of high-quality steel cutter and vacuum heat treatment, wear resistance, longer life. Straightening block can be cast iron, alloys, plastics Wang, all shaft parts are all 40CR or 45CR steel, and after straightening process, the gear is used in all forging billet, straight and tooth surface by high frequency hardening, hardness up HRC55-58 degrees.
3. Straight shaft with high pressure wheel straight before cutting the wire straightening, wire feeding pressing the pinch roller lever to adjust wire feed, the wire can even feed, direct modulation axis is the key product formed by direct modulation straightening blocks and tone straight shaft fixed to adjust the horizontal and vertical products to conform to requirements. Adjusting the pressing handle, the wire and the wire is more horizontal and vertical production rate increase or decrease. Finally, adjust white blades gun on the length of the product to meet the requirements.
4. Fast, stable performance, simple operation.
Sufficient Stock Machine
We can deliver the machines within 1 week after you confirming the order.
Reasonable Rotary Straightening Structure
Only need to input the cutting length, then machine will run automatically, which is easy to maintain.
Parameter Of High Speed Wire Straightening and Cutting Machine:
| Model | HS-HC-1.1-1.5 | HS-HC-1.6-3 | HS-HC-2-4 | HS-HC-3-5 | HS-HC-5-7 |
| Input Power | AC380V(50Hz/60Hz) |
| Suitable Wire Material | Normal low carbon steel wire/stainless steel wire/galvanized steel wire/copper coated steel wire |
| Air Pressure | 0.5-0.6Mpa |
| Wire Diameter | 1.1-1.5mm | 1.6-3mm | 2.0-4.0mm | 3.0-5.0mm | 5.0-7.0mm |
| Cutting Length | 50-5000mm |
| Max. Cutting Speed | Max. 350pcs/min | Max. 250pcs/min | Max. 250pcs/min | Max. 230pcs/min | Max. 200pcs/min |
| Wire Speed | 110m/min | 100m/min | 90m/min | 80m/min | 70m/min |
| Decoiler | With/without motor | Suitable material |
| 
| Decoiler without Motor | suitable for 1.1-1.5mm wire |
|  | Decoiler with Motor | suitable for up to 2mm wire |
Samples Of High Speed Wire Straightening and Cutting Machine
Product Tags:
|
|
High Speed Steel Wire Straightening Cutting Machine 5-7mm Wire Images
|
